"Accessories"

Due to availability product, some products may differ than those in pictures.

12v 500-1000mA, AC adapter
Excellent for use with any of our 12v EL Wire Inverters and all of our Cold Cathode Inverters.

(Inverter not included.)

Input: 110v AC
Output: 12v DC @ 500-1000mA

$15.50
12v-AC
Options: 
9v AC adapter for our<br>DF-9 inverter
This AC adapter is specially made for use with our DF-9 EL Wire Inverter.

(Inverter not included.)

Input: 110v AC
Output: 9v DC @ 300mA

$15.50
9v-ac-for-DF9
"Quick-Connecters"
Includes: one female and one male quick-connecter with aprox. 6in leads.

$1.00
q-conn
"Quick-Connector" Splitters for EL Wire
Our “Quick-Connect” EL Wire splitters will allow you to run from 2 to 5 strands of our “Quick-Connect” EL Wire on the same inverter. Please remember not to exceed the total footage of EL Wire that the inverter is rated for.

(Not for use with our CCFL products)

$2.50
el-wire-splitter
Options: 
Quick-Connect EL Wire Extender
Our EL Wire extender comes with a male Quick-Connect on one end and a female Quick-Connect on the other end to easily connect to any of our EL Wire.

(Not for use with our CCFL products)

$4.50
el-wire-extender
Length: 
Lead Wire by the foot
This is for making your own custom extensions. Price is per foot.

(Select length by quantity in checkout)

$0.35
raw-lead-wire
12v Battery Holder (8-AA)
Excellent for use with any of our 12v EL Wire Inverters and all of our Cold Cathode Inverters
$5.00
bat-hold-f
Options: 
Molex pass-through with<br>accessory ON/OFF Switch
This is our Molex pass-through with accessory ON/OFF switch assembly. It is designed for computer power supplies. It comes with our Quick-Connector for powering any of our EL Wire or CCFL Inverters with no additional wiring necessary. (Note: molex is not switched)
$3.75
molex
Cig. Lighter Adapter
This is our fused cigarette lighter adapter. It works great with any of our 12v EL Wire, or Cold Cathode Inverters.
$2.50
cig-adapt
9 volt tabs
$1.00
9-volt-tab
Shrink Tube
Our heat shrink tube is sold by the foot. 1/8" is perfect for the 2.2mm wire, 3/16" is best for the 3.2mm, and 1/4" is best for our 5mm wire. Heat with a heat gun or other heat source to shrink down to strengthen your solder joint.
$1.25
shrink-tube
Options: 
AA Battery
AA Battery (brand may vary)

NOTE: All batteries are non-returnable and are non refundable

$1.00
AA-batt
Options: 
Section of Rosin Core Solder
you may select: 5ft, 10ft, or 20ft of Rosin Core solder.
No flux needed
$2.00
solder
Options: 
ON/OFF Rocker switch
ON/OFF Rocker switch comes with approximately 6in leads
$2.75
on-off
Cold Cathode Installation Kit
This kit comes with (4) mounting clips and (6) screws for mounting any of our double cold cathode kits and the inverter.
$2.50
ccfl-installation-kit
5.0mm el wire clips
50pc. clips for our 5.0mm el wire
$15.00
50-el-wire-clips
Solder Charge
Regular solder charge
$2.20
solder-charge